pathfinder4x4vans@gmail.com

PF804GM 4 inch Suspension Kit                           $645.00
This kit contains all the basic components to install the axle of your choice into a 1976 to 96 GM van. Kit includes

*Leaf Springs (pr)
*Urethane shackle and spring eye bushings
*Shackle frame blocks
*Shackle set w/ hardware
*Hanger brackets with bolts

Not recommended for conversion using right hand drive GM pick-up axles

PF806GM 6 inch Suspension Kit                           $665.00
This kit contains all the basic components to install the axle of your choice into a 1976 to 96 GM van. Kit includes

*Leaf Springs (pr)
*Urethane shackle and spring eye bushings
*Shackle frame blocks
*Shackle set w/ hardware
*Hanger brackets with bolts

PF808GM 6 inch Suspension Kit                           $680.00
This kit contains all the basic components to install the axle of your choice into a 1976 to 96 GM van. Kit includes

*Leaf Springs (pr)
*Urethane shackle and spring eye bushings
*Shackle frame blocks
*Shackle set w/ hardware
*Hanger brackets with bolts

PF-340000 Engine Crossmember                           $220.00
Designed to bolt underneath the front frame rails just as the 2wd suspension and crossmember assembly. The crossmember  is constructed to give as much axle clearance as possible. You will need to drill the crossmember to match your motor mount bolt configuration.

PF-324000 Universal Spring Hanger Set                   $39.95
Manufactured with an off-set 9/16 bolt hole. Measures 3-1/2 inches inside. Designed to be used with aftermarket springs with urethane bushings. Kit includes (2) 9/16 x 5 grade 5 w/locknuts and (2) hanger brackets.

PF-324041 Universal Shackle Hanger Set          $39.99

Universal shackle hanger bracket set. 1-1/8 inside diameter.
(Designed for 2-1/2 in wide springs.)

Universal Shackle Sets                                          $97.00
PF-324031    1/2 bolts on 3-1/2 centers.
PF-324032    1/2 bolts on 4.0 centers
PF-324033    9/16 bolts on 3-1/2 centers
PF-324034    9/16 bolts on 4.0 centers

The third bolt and sleeve add greater stability to the shackle assembly. Various sleeve outside diameters available. Check the I.D. of your spring bushings.

U-bolt Sets                                        Starting at $39.00 set

1/2, 9/16 AND 5/8 sizes available. Includes “high” nuts and washers. Provide measurements for price and availability.

Urethane Spring Bushings

We have a large selection of urethane springs bushings and sleeves to rebuild a multitude of springs. Kits start at $40.00 and up.

PF-33012  Dana 44 Steering Knuckle kit               $120.00

Dana 44 steering arms are designed to be mounted to the top of “flat top” 1976-79 GM right side steering knuckles. Steering knuckle modification is required. Three holes must be drilled into the top of the steering  knuckle to match the steering arm.

PF-33014 Dana 60 Steering Arm Kit                      $145.95

Designed to go over the top of the right side steering knuckle trunnion cap.Kit includes steering arm, trunnion cap, bolts, lockwashers and locking cones.
No modification to to the steering knuckle or special tools are required.

PF-33119 GM Drag Link Assembly                         $175.00

Designed to connect to the OEM centerlink and the new Pathfinder steering arms (both Dana 44 and 60). Assembly is new and fully adjustable.

Block kits for 2-1/2 inch wide springs

PF324003    3 inch lift blocks, tapered                  $58.25
PF324004    4 inch lift blocks, tapered                  $79.00
PF324055    5-1/2 inch lift blocks, tapered            $102.35

Block kits for 3 inch wide springs

PF324043     4 inch lift blocks, tapered                 $88.66
PF324044     4 inch lift blocks, non tapered           $95.75
PF324056     5 inch lift blocks, tapered               $159.00
PF324057     5 inch lift blocks, non tapered           $159.00