For orders placed via the online store

Place your order via PayPal, freight totals will be calculated soon after the order has been
placed and you will be notified of the total shipping cost.


Bad Coil Springs?

How can I tell if my coil springs are worn out?

 One way to check the coil springs ability to support the weight of the  vehicle, is to remove one of the track bars. This will allow the  remaining track bar to center the axle. Before removing the track bar,  take some measurements. Measure and record the distance from the bump  stop to the top of the axle housing. Then remove one of the track bars.  You may need to drive it around the  block and give the suspension a  chance to settle. Then, remeasure again. If the change in measurement is substantial, replace the coils. Or if you have 150,000 plus miles on  the OEM Pathfinder coils it wouldn't hurt to change them

Quadravan,van susp F L Int bushing

Shown is the left side bump stop barely 1/4 inch above the axle tube, not a ggod sign. There should be at least 1 to 1-1/2 inch gap.

For parts inquiries or information, please call office phone 385-202-7176 or cell phone 801-915-1402

Call anytime from 9:00 AM to 9:00 PM Mtn time, but should you miss us and be required to leave a message, leave day time and night time contact numbers and we will return your call as so as we can.

or  e-mail us at